AMF Boat Company Limited

AMF Boat Company Limited
Offshore Power - Alloy Boat Builders

Monday, April 4, 2011

Windows & Doors - Anodising V's Powder Coating


The following is an article from our window and door supplier " Seamac Aluminium" explaining the differences between Anodising and Powder Coating aluminium doors and windows in a marine environment. The difference between a quality product and an average or poor product can be all in the details. - AMF Boats

There are two forms of finishing or applying protective coatings to aluminium marine windows. There is Anodising, or Powder coating.


There is also spray painting but I do not include this as an option as I have never seen an acceptable job done this way, and many have tried!


Powder coating is a process where the mill finish alloy is etched and then covered with a fine powder of the colour required. This mix is then heated to a point where it melts and forms a hard ‘skin’ on top of whatever it is applied to. There have been many different types of powder introduced over the years, some even have a sort of Teflon in it. Powder coat it is a fairly thick film of paint and has excellent coverage characteristics. The one with Teflon is very difficult to stick or seal to, so be ware.


Anodising is a controlled acceleration of the natural oxidisation of aluminium. It is a process that involves the opening of the pores of the metal, the application of colour dyes into these pores and then the sealing and cleaning of the chemicals from the surface. This is all done in baths where electricity is applied to the metal, which causes the oxidisation to occur but in a controlled environment giving you a smooth and consistent finish. This process leaves the colour in the metal, not on it, so whatever the surface condition is before anodising, is visible afterwards. The big benefit being this finish is in the metal and will not ever flake or peel off.

As for colour fastness, powder coating is a paint and as such will fade, dry out and go powdery on the surface if left with little maintenance. Cleaning down with fresh water and waxing, as you would do with your car, will prolong this finishes ability to withstand the harsh marine environment. Anodising presently is supplied in Silver and Black. I personally have seen Silver windows that had been in the marine environment for 27 years and they showed little sign of deterioration. The Black colour, especially from the early days, does have a tendency to get a ‘blu’ish’ hint about it and can go a little flat or dry looking, but this takes many years with little or no maintenance. This is a changing of the dye colour within the pores, it is not a breaking down of the finish itself. The metal is still protected and the finish will never ‘peel or flake’.
Powder coating is a relatively heavy paint that hides many surface impurities thus less time is required for metal preparation during window production. The paint hides minor surface defects such as scratches and minor marking etc etc.
Powder coating is a bit like ‘shrink wrapping’ something. As long as the surface maintains its integrity, it is ok. But, once it cracks, or is cut, marked or stressed in anyway, moisture gets underneath and wreaks havoc on the metal. It is trapped beneath the skin and runs along underneath like an acid eating the metal away in its path. Once this begins it is all but impossible to fix. We have all seen winch handles, masts and powder coated patio furniture after a few years in the sun and rain. Yes there are good and bad powder coaters and some do a better job than others, but a film of paint applied onto the surface of most anything used in a marine environment will break down eventually, and need re-coating.
Anodising is by far the most reliable and long lasting finish for marine windows. It is hardwearing and permanent. With little maintenance, it maintains its appearance for years and will never peel or flake off. So long as the windows are glue fixed to our recommendations and totally isolated from dis-similar metals, anodising will last indefinitely.
Powder coating requires regular maintenance as does the surface of your car. If not cleaned and waxed regularly, it very quickly begins to look run down and failure is all but impossible to prevent.
SeaMac windows are all anodised unless powder coating is specifically requested or required. We supply powder coated windows at owners risk. If the finish must be white, then they must be powder coated. In NZ, there is no such thing as white anodising. Most, if not all, of our opposition powder coat their windows.
When the pro’s and con’s are spelt out to customers, almost everyone I have talked to goes with anodising. It is simply better!
I base this opinion on 42 years in the aluminium window industry, both residential/commercial, and marine. Yes we do supply powder coated windows/doors on the odd occasion, but this scenario is always pointed out.
In the case of doors on the aft wall of a vessel, this is the best case scenario as they are protected somewhat by the overhang of the roof from the sun, and, because the vessel generally swings into the wind protecting these units from the sand and saltwater blasting from mother nature. Although still not my preferred or recommended finish, in this situation there is a limited amount of ‘protection’ offered enhancing the paints ability to perform.
To summarise,
Seamac Aluminium prefers anodising as it has stood the test of time. Yes it takes us longer to prep the frames and yes we must take greater care with handling and processing, but the end product is one that will last. Does it cost more?? I suppose it must, a little bit. But the end product is something that you can rely on and trust in. Is this not worth just that little bit more???
If you are a boat builder, this is a great sales point when marketing your boats. You are not offering the cheapest option, you are offering the best available!
If you are an owner, you know you’ve gotten the best there is and your windows will look as good as they do now, for many years to come.
http://www.seamac.co.nz/

20 comments:

  1. Very informative. Marine doors and windows could be protected with the help of powder coating. You have to learn more about topics like this for your better understanding about their purposes. Aside from that, you could purchase marine paneling as material from well known companies to ensure that it is made of a good quality.

    ReplyDelete
  2. I came across your blog. Its really nice and very useful information.

    Window Maintenance Services Ltd

    ReplyDelete
  3. Some of my metal stuff are powder coated by Etch Coatings and till now they are in good condition - rust free.

    ReplyDelete
  4. Aluminium door is also safe, and you get more verity. nice information.

    ReplyDelete
  5. Hello,
    Very good post with good representation...For daily basis Aluminium windows are best for homes...Thank you for sharing your blog....... sliding doors windows | aluminium doors

    ReplyDelete
  6. Today's tilt-in designs allow a home owner to simply pull the window inward from the inside of the home, and then clean the outer surface of the window while standing inside the home. Not only is this much safer and easier in terms of the labor of cleaning a window, but the window gets cleaned better because it's much easier to clean a window from the comfort of your home than whilst standing on a ladder outside leaning against the side of the house itself! residential window replacement

    ReplyDelete
  7. First You got a great blog .I will be interested in more similar topics. i see you got really very useful topics, i will be always checking your blog thanks. Ramen en deuren

    ReplyDelete
  8. Thanks for sharing this information. I really like your blog post very much. You have really shared a informative and interesting blog post . Aluminium deuren

    ReplyDelete
  9. This is a wonderful article, Given so much info in it, These type of articles keeps the users interest in the website, and keep on sharing more ... good luck. casement windows

    ReplyDelete
  10. this is really nice to read..informative post is very good to read..thanks a lot!
    replacement windows Livermore

    ReplyDelete
  11. NorthShield Windows and Doors offers a wide selection of high-quality windows and doors. Among other features, our products offer the latest in security, durability, and design. We are homeowners too, that’s why we work within your style preferences to find exactly what you need and provide you with durable products that will keep your home safe.Windows replacement

    ReplyDelete
  12. Здравствуйте! Посмотрите справочник выпускаемых медикаментозных препаратов. В справочник вошли сведения об около семистах производимых медикаментозных препаратах, выпускаемых отечественными и зарубежными фармкомпаниями. О каждом медпрепарате дана исчерпывающая инфа: состав и форма выпуска, лечебные свойства, показания к применению, критерии эксплуатации, противопоказания, взаимодействие со спиртными напитками, вероятные побочные эффекты и взаимодействие иными медицинскими препаратами, кроме того вероятность использования при грудном вскармливании, беременности. В справочник включен тематический указатель, где представлена инфа о том, какое лекарственное средство следует назначать при каких-то болезнях, состояниях, синдромах. Путеводитель расположено на мед портале. Будьте здоровы

    ReplyDelete
  13. I am a new user of this site so here i saw multiple articles and posts posted by this site,I curious more interest in some of them hope you will give more information on this topics in your next articles. which is the best indigo powder in India

    ReplyDelete
  14. Параллельно-раздвижные окна и двери, иначе называемые PSK-порталом, монтируются специально для сохранения незаполненного, свободного места. Обычные виды раскрываются вовнутрь дома, что требует весьма значительную часть места в помещении. Нынешние модели дают возможность избегнуть данной проблемы, увеличить световой и воздушный поток в помещении.
    PSK-портал – это системы, которые владеют очень обширной площадью стеклопакета. Для обеспечения способности раздвигания створок имеются верхние и нижние полозья, благодаря которым устройство бесшумно и легко движется.
    Скольжение совершается с помощью ходовых роликов, которые имеют в своем составе опору как компонент армирования, которое позволяет максимально равномерно распределять массу по по всей раме. Они дают возможность створке окна передвигаться во всевозможных режимах (наклона, сдвига).
    Высота двери должна быть не более 2,36 метра, а ширина створки будет изменяться от 0,67 метра до 1,60 метра. С учетом суммарного веса (может быть от 100 кг до 200 кг), на параллельно-раздвижное окно устанавливается определенная фурнитура ради обеспечения надежного открывания - закрывания створок, продления срока использования. Ширина свободного проема может достичь двух метров.
    Раздвижные окна и двери славятся хорошими герметичными свойствами, отличными показателями звуко-, теплоизоляции, имеют высокий уровень противовзломности, идеально подходят для всех видов современных профилей. При установке применяют опоясывающие щеточные уплотнители, которые заметно улучшают работу створок.
    В том случае, если вы хотите оформить большой загородный дом, лоджию, городскую квартиру или балкон согласно модным тенденциям в дизайне, то компания-производитель СВ Окна сделает и установит параллельно-раздвижные окна и двери.

    ReplyDelete
  15. Online reading is not my thing. But after reading your blog I am really pleased. I don’t know about other blogs but this I will definitely keep coming back to.
    teflon powder coating

    ReplyDelete
  16. We offer End Of Tenancy, After Builders, Communal Areas, Domestic, Commercial, Carpet and Deep Cleaning, Painting, Home Organiser, Moving & Inventory. Interior Painting

    ReplyDelete
  17. Blockout Roller Blinds and Roman Blinds are the most popular choices for bedrooms for total privacy and to block all light. Window Blinds

    ReplyDelete
  18. There are two types of latex mattresses available in the market - one is natural and the other one is synthetic. truck mattress

    ReplyDelete
  19. These workers must sleep during daylight hours and blackout window shades can block up to 99% of incoming light. Australian made chopping boards

    ReplyDelete